Product Description
Our all New Intelli-Tower raises bar on quality, innovation, performance, and value, all while being made in the USA in our own machine shop. The Series II tower is driven by a worm gear winch, either by hand with the included hand crank, or by drive with a 5/8 socket. The winch rope is drawn thru a series of pulley which counter-acts the forces to minimize the tower tipping forward. To help stabilize the tower and avoid violent reaction if vacuum seal is broken, a front stabilizer with a self-adjusting rubber pad helps everything stay ridged and secure while providing a lower pulley for down pulls and also accepts an auxiliary vacuum plate. The adjustable pulley block has 2 eye bolts for auxiliary pulling attachments for rachet straps and a convenient laser pointer to help you get the pulley and tower lined up for your pulls. The 3x3 structural aluminum tower can separated from the base for easy mobility and storage. The Vacuum base boost over 2000lb of holding force. The tower comes standard with a battery-operated vacuum pump. An option compressed air vacuum generator can be purchased as an option or compressed air only generator. The vacuum base has a rubber seal the will last a very long time and will seal better than a foam gasket. The 4 castor wheels make moving and positioning the tower very easy and fast. The castors wheels also keep the rubber seal of the ground to prevent it from damage and premature wear. The 4 castors also lower the vacuum base for use and them back up for storage. This tower was designed by a tech, made by a tech will techs in mind. The tower was designed for maximum performance with a bargain price. Towers ship for flat fee of $50 to the lower 48 states by UPS ground only in 3 boxes. No overseas sales or sales to Alaska or Hawaii.
Specs: Tower is 50 inches tall
Base is 18x14 inches
1500lb Worm gear winch with 30 to 1 ratio. can be driven by hand or drill with 5/8 socket. Not for impact use.
Base separates from tower with lynch pin for mobility.
Has down pull capability with built inn lower pulley on front stabilizer.
Dual rubber seals to insure quick and strong vacuum seal even on ruff surfaces
Battery power 1/4 HP 20-volt vacuum pump rated at 3CFM and a 5 Pa max vacuum for 60 minutes.
Laser pointer on pulley block for easy tower and pulley height preset.
No need to step on vacuum plate to get a seal.
Vacuum plate generates over 2000lb of atmospheric pressure under vacuum @28HG
Can be operated with compressed air with option vacuum generator.
Excellent design and strong materials make for a very ridged tower.
Made in Eureka Illinois, USA in our own machine shop with as many domestic parts and materials as possible.
Tech designed with the Tech in Mind.
Proprietary pulley systems that increase pulling forces and helps stabilize tower from tipping forward.
Pulling power average, 675lb
Available with Battery powered vacuum pump only (Standard)
Available with compressed air vacuum generator only
Available with both battery powered vacuum pump and compressed air vacuum generator
Please allow 1-3 week for delivery as we will be making them as they are ordered
A Series I tower uses a battery powered actuator will be available soon.