An unique , all new ininnovative design and operation. The Ice Pick is a light weight scalable slide hammer for both hot and cold glue pulling. All aluminum with a 1/2 diameter Stainless Steel bearing rod shaft, choose your length of shaft , 12-14-or 16 inch. The slide is 9 ozs, and has built in linear bearings giving it a never seen before precision and smoothness. The slide also has the built in socket gear that will mesh with the sure twist cold glue adapter that comes standard , or pick the optional round nose adapter in place of the sure twist adapter. Configuring the hammer is easy due to the flats milled into the bearing shaft that accept a 12mm open end wrench to make changing, loosening and tightening effortless. The assembly is just under 2 pounds. The included hot glue adapter comes off and on with a pull of a pin and will work with most all tabs. You can scale up and add accessories such as a pass thru tab adapter and/or a non pass thru tab adapter with tab retention plunger. Be sure to add our all new cold glue tabs for maximum performance and Sticky Gum cold glue. Customized your hammer to your exact specification and style by checking the option boxes and adding the up grades you want. The next big thing in slide hammers is HERE! Be sure to visit the slide hammer accesories page and add bumpers and other items to customize your hammer.
(COLOR SUBJECT TO CHANGE)